Orbital Roof Decompression and Transposition of Orbital Contents for Treatment of Orbital Deviation Associated With Fibrous Dysplasia.

A 25-year-old male was admitted to our institute complaining of caudal deviation of orbit. Surgery was performed through a coronal incision, a subtarsal incision, and a lynch incision. The periosteum of the orbital roof was raised, and the supraorbital wall was shaved cephalad in reference to the nonaffected side. Then the periosteum was incised from the inferior margin of the orbit to the medial and lateral palpebral ligaments, and the periosteum of the orbital floor was raised until the inferior orbital fissure. After the circumferential intraorbital periosteal detachment, the orbital contents could be readily moved cephalad ward. The outer table of the calvarial bone was transplanted to the orbital floor, and the palpebral ligaments were fixed 5 mm cranially. In the 5-year follow-up, the patient's visual function was normal, and no recurrence of fibrous dysplasia was observed.

Tryptase-Positive Mast Cells Promote Adipose Fibrosis in Secondary Lymphedema through PDGF.

Lymphedema is a chronic and progressive condition that causes physical disfigurement and psychological trauma due to the accumulation of lymphatic fluid in the interstitial space. Once it develops, lymphedema is difficult to treat because it leads to the fibrosis of adipose tissue. However, the mechanism behind this remains unclear. The purpose of this study was to investigate the involvement of mast cells (MCs) in the adipose tissues of patients with lymphedema. We found that fibrosis spread through blood vessels in the adipose tissues of lymphedema patients, and the expression of the collagen I and III genes was significantly increased compared to that of those in normal adipose tissue. Immunostaining of vimentin and α-smooth muscle actin showed that fibroblasts were the main cellular components in severely fibrotic regions. Toluidine blue staining confirmed a significant increase in the number of MCs in the adipose tissues of lymphedema patients, and immunostaining of serial sections of adipose tissue showed a significant increase in the number of tryptase-positive cells in lymphedema tissues compared with those in normal adipose tissues. Linear regression analyses revealed significant positive correlations between tryptase and the expressions of the TNF-α, platelet-derived growth factor (PDGF)-A, and PDGFR-α genes. PDGF-A-positive staining was observed in both fibroblasts and granules of tryptase-positive MCs. These results suggest that MC-derived tryptase plays a role in the fibrosis of adipose tissue due to lymphedema directly or in cooperation with other mediators.

Modified Preparatory Intravascular Stenting Technique in Super-microsurgical Lymphaticovenular Anastomosis for the Treatment of Lymphedema.

Clinical studies have reported that lymphaticovenular anastomosis (LVA) is more effective for early-stage lymphedema. However, the diameter of lymphatic vessels in early-stage lymphedema is thin (only about 0.3 mm). In this article, we report a modified preparatory intravascular stenting technique (PIST) for LVA with smaller lymphatic vessels and present the results of its application for the treatment of secondary lymphedema. In this technique, a 9-0 nylon thread is inserted into the target lymphatic vessel. Then, the thread is pulled until its tip has entered the lymphatic vessel. After that, the thread is allowed to proceed into the lumen by pushing it. Finally, with the nylon in place, the lymphatic vessel is transected and the lumen is secured. In this report, we investigated the surgical time for LVA between 10 patients who underwent LVA with modified PIST (group A) and another group of 10 patients who underwent LVA without the technique (group B). Lymphatic lumen was secured at all sites where indocyanine green lymphangiography confirmed lymphatic flow. The average outer diameter of lymphatic vessels in group A and B were 0.36 mm and 0.53 mm, respectively. The average surgical time for LVA in group A was 136 minutes, which was significantly shorter than the 187 minutes in group B. Our results indicated that modified PIST can help secure the lymphatic lumen even when the lymphatic vessels are thin. As a result, this technique can significantly reduce the surgical time for this procedure.

Experimental Study of Warburg Effect in Keloid Nodules: Implication for Downregulation of miR-133b.

Background: A keloid is composed of several nodules, which are divided into two zones: the central zone (CZ; a hypoxic region) and the marginal zone (MZ; a normoxic region). Keloid nodules play a key role in energy metabolic activity for continuous growth by increasing in number and total area. In this study, we aimed to investigate the roles of the zones in the execution of the Warburg effect and identify which microRNAs regulate this phenomenon in keloid tissue. Methods: Eleven keloids from patients were used. Using immunohistochemical analysis, 179 nodules were randomly chosen from these keloids to identify glycolytic enzymes, autophagic markers, pyruvate kinase M (PKM) 1/2, and polypyrimidine tract binding protein 1 (PTBP1). Western blot and qRT-PCR tests were also performed for PKM, PTBP1, and microRNAs (miR-133b and miR-200b, c). Results: Immunohistochemical analysis showed that the expression of the autophagic (LC3, p62) and glycolytic (GLUT1, HK2) were significantly higher in the CZ than in the MZ. PKM2 expression was significantly higher than PKM1 expression in keloid nodules. Furthermore, PKM2 expression was higher in the CZ than in the MZ. However, PKM1 and PTBP1 expression levels were higher in the MZ than in the CZ. The qRT-PCR analysis showed that miR-133b-3p was moderately downregulated in the keloids compared with its expression in the normal skin tissue. Conclusions: The Warburg effect occurred individually in nodules. The MZ presented PKM2-positive fibroblasts produced by activated PTBP1. In the CZ, PKM2-positive fibroblasts produced lactate. MiR-133b-3p was predicted to control the Warburg effect in keloids.

Secondary Reconstruction of Late Deformities of the Orbitozygomaticomaxillary Complex using a Halo Device.

Reconstructing late deformities of the orbitozygomaticomaxillary complex after inadequate treatment of facial fractures requires zygomatic osteotomy to reposition the bony fragments to their anatomical position. However, confirming the position of the bone fragments can be challenging due to the loss of anatomic landmarks caused by bone remodeling, and swelling resulting from surgery, which might hinder locating the bone from the body surface. Here, the authors describe fixation of the halo of the Blue Device multi-vector distraction system to the patient's ear canal, with alignment of the position of the zygoma by measuring the distances between the halo and zygoma using several reference points. This technique allows for measurement not only from the body surface using a K-wire but also directly to the bone using a needle. The authors applied this technique in 2 cases of post-traumatic deformities after complex zygomatic fractures. Both cases achieved an almost symmetrical appearance of the infraorbital region.

Abdominal Wall Incisional Hernia Repair with the Anterior Component Separation Technique and Reinforcement with an Anterior Rectus Abdominis Sheath Flap.

Mesh repair is currently the mainstay of treatment for abdominal wall incisional hernias and is considered the standard of care. However, if radiotherapy is used, the possibility of complications such as exposure or infection of the prosthesis after the surgery as a complication of the radiotherapy is a concern. The patient was a 51-year-old woman who underwent laparotomy by a mid-abdominal incision for ovarian tumors. Approximately 2 years later, the patient presented with a hypertrophic scar of the wound and mild pain in the scar. The hypertrophic scar was improved gradually by corticosteroid injection. However, she had a bulge on the left side of the umbilicus just below the hypertrophic scar. Computed tomography showed a 65 × 69 mm2 hernial orifice on the left side of the umbilical abdominal wall, and an abdominal wall incisional hernia was diagnosed. The patient underwent closure by the ACS technique and reinforcement by unilateral inversion of the anterior rectus abdominis sheath for the abdominal wall incisional hernia. No recurrence of the hypertrophic scar or abdominal wall incisional hernia was observed during the follow-up period. In the present case, the hernial orifice was closed by a modified ACS technique that was combined with the anterior rectus abdominis sheath turnover flap. This technique is likely a less invasive and relatively simple method resulting in a tighter repair of the abdominal hernia than the ACS method alone, without prostheses.

Axillary accessory breast cancer reconstructed by a thoracodorsal artery perforator flap: A case report.

INTRODUCTION: Primary accessory breast cancer is rare and most commonly occurs in the axilla. Due to its low incidence, few studies have discussed axillary reconstruction after accessory breast cancer resection. In the present report, we describe a patient who underwent axillary reconstruction with a thoracodorsal artery perforator (TAP) flap after resection, and reconstruction methods after resection of axillary accessory breast cancer are discussed based on current and previous reports. PATIENT CONCERNS: A 60-year-old woman presented with a 7-year history of a gradually growing lump in the left axilla. DIAGNOSIS: The patient was diagnosed with latent breast cancer, axillary lymph node metastasis, or carcinoma of the accessory axillary breast with axillary lymph node metastasis. INTERVENTIONS: After preoperative chemotherapy, tumor resection and axillary lymph node dissection were performed, followed by immediate axillary reconstruction using a TAP flap. The patient received postoperative adjuvant endocrine and radiation therapy (50 Gy). OUTCOMES: No recurrence or metastasis was observed for 5 years postoperatively. The reconstructed axilla was not bulky, and scar contracture was not observed, with a full range of motion of the shoulder joint. CONCLUSION: We described a patient who underwent immediate TAP flap reconstruction after resection of accessory breast cancer and axillary lymph node dissection, followed by postoperative radiation, which could cause scar contracture. The patient was followed up for more than 5 years after the operation and radiation therapy, and the appearance of the axilla and range of motion of the shoulder were good despite postoperative radiation.

Modified trilobed transposition flap for a distal nasal defect.

Reconstruction of a distal nasal defect is challenging due to poor skin mobility and the potential for nasal alar retraction. A trilobed flap can utilize more mobile proximal skin, increase the total rotational arc, and decrease the tension associated with flap transposition. However, the trilobed flap may not be ideal for distal nasal defects because each flap is designed using immobile skin, which may lead to flap immobility and free margin distortion. To overcome these problems, the base and tip of each flap were extended further from the pivot point than those of the conventional trilobed flap. Herein, we report the use of the modified trilobed flap to treat 15 consecutive cases of distal nasal defects that occurred from January 2013 to December 2019. The mean duration of follow-up was 15.6 months. All flaps survived completely, and satisfactory aesthetic outcomes were achieved. No complications such as wound dehiscence, nasal asymmetry, or hypertrophic scarring were observed. The modified trilobed flap is a simple and reliable treatment for distal nasal defects.

Glove-shaped Foam with Negative Pressure Wound Therapy for Skin Graft Fixation on the Hand.

Tie-over bolster dressing has been the gold standard for skin graft immobilization. However, skin grafting onto the hand remains challenging. To prevent shearing of the skin, joint fixation with Kirschner wire and casting is often required. However, wire fixation through the joint can disrupt finger growth and cause joint contracture, especially in pediatric patients. So, we performed graft fixation with negative pressure wound therapy (NPWT). The use of NPWT with skin grafting has recently been reported. Previous studies have reported that NPWT can provide even pressure on irregular wounds and in highly mobile areas. However, application of NPWT in the digital region often results in air leaks. This report includes four patients who required skin grafting on the hand. All patients received skin grafts in the affected area. Graft fixation was performed with NPWT. A glove-shaped form was designed. The hand was encased on the ventral and dorsal sides and small pieces of foam were placed between the fingers. The fixation was maintained for 7 days at a pressure of -50 to -80 mmHg. None of the cases had air leak requiring reattachment of the system and graft take was successful in all cases without any complications. The NPWT "glove-shape" technique enabled maintenance of average negative pressure for all skin grafts on the hand. This technique does not require joint fixation and may help to prevent growth disturbance and joint contracture.

Synchondrosis fusion contributes to the progression of postnatal craniofacial dysmorphology in syndromic craniosynostosis.

Syndromic craniosynostosis (CS) patients exhibit early, bony fusion of calvarial sutures and cranial synchondroses, resulting in craniofacial dysmorphology. In this study, we chronologically evaluated skull morphology change after abnormal fusion of the sutures and synchondroses in mouse models of syndromic CS for further understanding of the disease. We found fusion of the inter-sphenoid synchondrosis (ISS) in Apert syndrome model mice (Fgfr2S252W/+ ) around 3 weeks old as seen in Crouzon syndrome model mice (Fgfr2cC342Y/+ ). We then examined ontogenic trajectories of CS mouse models after 3 weeks of age using geometric morphometrics analyses. Antero-ventral growth of the face was affected in Fgfr2S252W/+ and Fgfr2cC342Y/+ mice, while Saethre-Chotzen syndrome model mice (Twist1+/- ) did not show the ISS fusion and exhibited a similar growth pattern to that of control littermates. Further analysis revealed that the coronal suture synostosis in the CS mouse models induces only the brachycephalic phenotype as a shared morphological feature. Although previous studies suggest that the fusion of the facial sutures during neonatal period is associated with midface hypoplasia, the present study suggests that the progressive postnatal fusion of the cranial synchondrosis also contributes to craniofacial dysmorphology in mouse models of syndromic CS. These morphological trajectories increase our understanding of the progression of syndromic CS skull growth.

An original method of analysis of the breast contour curve with 3-dimensional imaging: Case series.

INTRODUCTION: Postoperative assessment of breast reconstruction results has become increasingly important. In this paper, a unique analysis method with 3-dimensional surface images of patients who were treated with immediate breast reconstruction is presented. PATIENT CONCERNS: Five Japanese women were suspected of having breast cancer and visited our hospital for treatment. DIAGNOSIS: Breast cancer was diagnosed by biopsy, mammography, ultrasonography, computed tomography, and magnetic resonance imaging. INTERVENTIONS: Five patients underwent nipple/skin-sparing mastectomy, concomitant sentinel lymph node biopsy, and immediate breast reconstruction in our hospital. Three cases were reconstructed by extended latissimus dorsi flaps, one was reconstructed by a pedicled transverse rectus abdominis myocutaneous flap, and one was reconstructed by a deep inferior epigastric artery perforator flap. Three-dimensional photographs were taken 1 year postoperatively. The similarity of the breast contours between the reconstructed breast and the nonaffected opposite breast obtained from 3-dimensional images was analyzed. The calculated value is called the breast contour score. OUTCOMES: No recurrence was observed during the follow-up period in any cases. All cases could be analyzed by breast contour score to evaluate the breast shapes. CONCLUSION: The scores become a relative value that ranges from 0 (completely different) to 100 (completely the same). By expressing the score as a relative value, the breast contour score could help us understand the degree of breast symmetry more intuitively.

Lymphoscintigraphy for prediction of effect of lymphaticovenular anastomosis for treatment of secondary lower limb lymphedema.

OBJECTIVE: The outcomes of lymphaticovenular anastomosis (LVA), especially for the lower extremities, have varied. To determine the optimal patient selection for LVA, we evaluated the smooth muscle function of lymph vessels using preoperative lymphoscintigraphy images and compared the findings with the LVA outcomes. METHODS: We performed a retrospective study of 81 patients with secondary lower extremity lymphedema who had undergone LVA between 2016 and 2018. To reduce the variability in the surgeon-specific variables that can affect the outcomes of LVA, all the cases from 2016 onward were performed by only two surgeons using standardized protocols for preoperative care, surgical technique, number of anastomoses, postoperative ambulation, and compression. The outcomes were evaluated by comparing the circumferences of the pre- and postoperative limbs. The preoperative lymphoscintigraphy findings were categorized into three types according to the range of the cephalad extent of the tracer as follows: type 1, tracer extending to the thigh or groin region; type 2, tracer extending to the lower leg or knee; and type 3, tracer localized at the ankle. The quantitative outcomes were evaluated by measuring the circumferences of the ankle, mid-calf, knee, and thigh. RESULTS: The average percentage in the reduction in the ankle, mid-calf, knee, and thigh circumference was 7.9%, 4.7%, 2.9%, and 3.0%, respectively. The average percentage in the reduction in the circumference for types 1 and 3 at the ankle, mid-calf, knee, and thigh was 11.6% and 8.6%, 7.6% and 1.6%, 5.2% and -0.5%, and 5.4% and -1.2%, respectively, with significant differences between types 1 and 3 in the thigh. The percentage of types 1, 2 and 3 was 60% to 76.4%, 11.7% to 20%, and 0% to 5.5% of the treated limbs that were similar in size to the contralateral healthy limb at the four sites of measurement, respectively. CONCLUSIONS: The use of LVA can effectively reduce the circumference of the lower limb. Our results suggest that the lymphoscintigraphy findings could help to predict the effect of LVA and could facilitate optimal patient selection.

A phase III, multicenter, single-arm study to assess the utility of indocyanine green fluorescent lymphography in the treatment of secondary lymphedema.

OBJECTIVE: Indocyanine green (ICG) fluorescent lymphography might be useful for assessing patients undergoing lymphatic surgery for secondary lymphedema. The present clinical trial aimed to confirm whether ICG fluorescent lymphography would be useful in evaluating lymphedema, identifying lymphatic vessels suitable for anastomosis, and confirming patency of lymphaticovenular anastomosis in patients with secondary lymphedema. METHODS: The present phase III, multicenter, single-arm, open-label, clinical trial (HAMAMATSU-ICG study) investigated the accuracy of lymphedema diagnosis via ICG fluorescent lymphography compared with lymphoscintigraphy, rate of identification of lymphatic vessels at the incision site, and efficacy for confirming patency of lymphaticovenular anastomosis. The external diameter of the identified lymphatic vessels and the distance from the skin surface to the lymphatic vessels using preoperative ICG fluorescent lymphography were measured intraoperatively under surgical microscopy. RESULTS: When the clinical decision for surgery at each research site was made, the standard diagnosis of lymphedema was considered correct. For the 26 upper extremities, a central judgment committee who was unaware of the clinical presentation confirmed the imaging diagnosis was accurate for 100.0% of cases, whether the assessments had been performed via lymphoscintigraphy or ICG lymphography. In contrast, for the 88 lower extremities, the accuracy of the diagnosis compared with the diagnosis by the central judgment committee was 70.5% and 88.2% for lymphoscintigraphy and ICG lymphography, respectively. The external diameter of the identified lymphatic vessels was significantly greater in the lower extremities than in the upper extremities (0.54 ± 0.21 mm vs 0.42 ± 0.14 mm; P < .0001). Also, the distance from the skin surface to the lymphatic vessels was significantly longer in the lower extremities than in the upper extremities (5.8 ± 3.5 mm vs 4.4 ± 2.6 mm; P = .01). For 263 skin incisions, with the site placement determined using ICG fluorescent lymphography, the rate of identification of lymphatics vessels suitable for anastomosis was 97.7% (95% confidence interval, 95.1%-99.2%). A total of 267 lymphaticovenular anastomoses were performed. ICG fluorescent lymphography was judged as "useful" for confirming patency after the anastomosis in 95.1% of the cases. CONCLUSIONS: ICG fluorescent lymphography could be useful for improving the treatment of patients with secondary lymphedema from the outpatient setting to surgery.

Application of augmented reality (AR) technology to locate the cutaneous perforator of anterolateral thigh perforator flap: A case report.

Multi-detector row computed tomography (MDCT) makes it possible to visualize the peripheral perforators of the anterolateral thigh (ALT) flap. However, to transfer the preoperative MDCT angiography data to the operative field requires effective techniques. In this report, we describe an application of augmented reality (AR) technology to harvest the anterolateral thigh flap. A 36-year-old female presented with a T2N2 squamous cell carcinoma of the lateral tongue. The patient underwent hemiglossectomy and microsurgical reconstruction using the left ALT flap. Three dimensional (3D) images the vascular image, vascular with muscles and vascular with outline of the thigh ware prepared. Then these images were exposed to an AR device. The location of the perforator was determined using the 3D vascular image on AR. The intraoperative location of the cutaneous perforator corresponded with the predicted location which was confirmed using the AR technique. A 6 × 15 cm left ALT flap was transferred to the defect. Microsurgical anastomosis was performed on the left superior thyroid artery and the internal jugular vein. There were no complications during the postoperative course. At the 6-month follow-up, the patient showed no evidence of flap and donor site complications. Our experience suggests that AR technology may effectively support the transfer of MDCT angiography images onto surgical sites.

Quantitative Morphologic Analysis of Cranial Vault in Twist1+/- Mice: Implications in Craniosynostosis.

BACKGROUND: The haploinsufficiency in the TWIST1 gene encoding a basic helix-loop-helix transcription factor is a cause of one of the craniosynostosis syndromes, Saethre-Chotzen syndrome. Patients with craniosynostosis usually require operative release of affected sutures, which makes it difficult to observe the long-term consequence of suture fusion on craniofacial growth. METHODS: In this study, we performed quantitative analysis of morphologic changes of the skull in Twist1 heterozygously-deleted mice (Twist1+/-) with micro-computed tomographic images. RESULTS: In Twist1+/- mice, fusion of the coronal suture began before postnatal day 14 and progressed until postnatal day 56, during which morphologic changes occurred. The growth of the skull was not achieved by a constant increase in the measured distances in wild type mice; some distances in the top-basal axis were decreased during the observation period. In the Twist1+/- mouse, growth in the top-basal axis was accelerated and that of the frontal cranium was reduced. In the unicoronal suture fusion mouse, the length of the zygomatic arch of affected side was shorter in the Twist1+/- mouse. In one postnatal day 56 Twist1+/- mouse with bilateral coronal suture fusion, asymmetric zygomatic arch length was identified. CONCLUSION: The authors'results suggest that measuring the length of the left and right zygomatic arches may be useful for early diagnosis of coronal suture fusion and for estimation of the timing of synostosis, and that more detailed study on the growth pattern of the normal and the synostosed skull could provide prediction of the risk of resynostosis. CLINICAL RELEVANCE STATEMENT: The data from this study can be useful to better understand the cranial growth pattern in patients with craniosynostosis.

Clinical Applications of Meshed Multilayered Anatomical Models by Low-Cost Three-Dimensional Printer.

SUMMARY: In recent years, even low-cost fused deposition modeling-type three-dimensional printers can be used to create a three-dimensional model with few errors. The authors devised a method to create a three-dimensional multilayered anatomical model at a lower cost and more easily than with established methods, by using a meshlike structure as the surface layer. Fused deposition modeling-type three-dimensional printers were used, with opaque polylactide filament for material. Using the three-dimensional data-editing software Blender (Blender Foundation, www.blender.org) and Instant Meshes (Jakob et al., https://igl.ethz.ch/projects/instant-meshes/) together, the body surface data were converted into a meshlike structure while retaining its overall shape. The meshed data were printed together with other data (nonmeshed) or printed separately. In each case, the multilayer model in which the layer of the body surface was meshed could be output without any trouble. It was possible to grasp the positional relationship between the body surface and the deep target, and it was clinically useful. The total work time for preparation and processing of three-dimensional data ranged from 1 hour to several hours, depending on the case, but the work time required for converting into a meshlike shape was about 10 minutes in all cases. The filament cost was $2 to $8. In conclusion, the authors devised a method to create a three-dimensional multilayered anatomical model to easily visualize positional relationships within the structure by converting the surface layer into a meshlike structure. This method is easy to adopt, regardless of the available facilities and economic environment, and has broad applications.